The Huddlecam 10x has multiple menus. It has a basic menu in the AMCAP software (available here... http://noeld.com/dl.asp?filename=AMCapSetup.exe) for adjusting the frame rate and resolution. The 10x also has 2 on screen displays for adjusting the Lens, and the Dome motors respectively.
The AMCAP menu is accessible by bringing up the program and going into the options menu. There you will see the Video Capture Pin option. Through this menu you can adjust
Frame Rate
Compression
Output Size
The Huddlecam 10x also has 2 OSDs. These are accessed by pressing the blue "Lens" button on your remote, or pressing the green "Dome" button.
The Lens menu is used for picture adjustment and has the following options
BL Comp (Backlight Compensation)
Sharpness
Saturation
NR (noise reduction)
WB (white balance)
Rgain
Bgain
AE (auto exposure)
Shutter
Iris
Brightness
A few things to note: The Noise Reduction, White Balance, Rgain, Bgain, and Iris all have no function in this menu. The shutter option is only adjustable when the auto exposure is is set to manual.
The Dome menu is used for motor adjustment and has the following options
Pan Speed
Tilt Speed
Scan Speed
Tour Path
Tour Dwell
Proportion
Auto Rev
Frame