- For masonry or drywall wall:Position on wall and mark wall for anchor placement. Pre-drill1/4 holes, minimum 1 deep.For double gang electrical box:Position over box with slots overlaying device mounting holes inbox.
- For masonry or drywall wall:Place included anchors in wall and mount to anchors using included#10 screws.For double gang electrical box:Mount to box using #6 screws and washers provided.
- Drill hole in wall through rear exit opening for cable access, or use base exit opening.
- Mount camera to mount with included ¼-20 screw.Utilize (0, 1 or 2) 1/4 washers as required, depending upon depth of threaded insert in base of the camera, in order to achieve a snug fit. Connect all cables.
Modified on: Fri, 9 Dec, 2016 at 11:28 AM
Did you find it helpful?Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.